How to Fix Nexus 5 Wireless Wi Fi Connection Problems

Many Google Nexus 5 users report to forums that they experience the Nexus 5 Wi-Fi connection problems. They give a feedback that other cellphones can connect to the same Wifi network successfully, while their Nexus 5 fails. They are also bothered by the failed wireless connections when they reach a new place after they leave a Wi-Fi network, even though the place has already been known to the system. Some said their Nexus 5 can connect to the Wifi network, but there is no data transfer on the device. When you face the Nexus 5 Wifi issues, what can you do to fix the Wifi problems? Actually, Wifi connection problems are common issues on many devices. Here we collect some helpful solutions posted on technology forums for you.
Solutions to Fix Nexus 5 WiFi Connection Problems:
Troubleshooting 1:
Some LG Nexus 5 owners suggest go to Airplane mode, switch it off and then turn it on back again. You would find the Wi-Fi connection works automatically.
Troubleshooting 2:
On your Google Nexus 5, go to Settings > Wireless and Networks > Wifi > Select Your Network Name > Tap Forget. After several minutes, you can reconnect the network and enter the password that may be needed and then check if the Wifi network connection is available for your LG Nexus 5.
Troubleshooting 3:
Sometimes, the Wi-Fi failure is caused by the Wi-Fi router, so you can double-check if the Wifi router is up-to-date following the manual instruction if you can access to the router.
Troubleshooting 4:
If you find the WiFi problems may be caused by the router, you can try to unplug its power and wait about 10 seconds. After that, plug it back in again. And reestablish the router to renew the connection 20 seconds later.
Troubleshooting 5:
If you are unable to have the Wifi router set up securely, you also can turn to the Wi-Fi router’s manufacturer for professional guides to update the WiFi router’s firmware.
Troubleshooting 6:
You must be aware that if you need the public wifi service, you need to access the required terms and conditions on a specific page before you can fully access the web. In hence, you may encounter the Wifi issue that the Wi-Fi connection is active on your Notification bar, while you are unable to access any webs. To solve this public wifi issue on Nexus 5, you can open the browser in your device and enter any URL which will lead you to a welcome page instead. You can follow the hints and accept the terms and conditions to freely enjoy the Wifi network.
Note: You may have to go through the same Google Nexus 5 Wi-Fi connection process to reconnection the WiFi network if you turn off the WiFi in public places.
Troubleshooting 7:
Sometimes, the Auto frequency settings may cause Wi-Fi problems if you use a dual-band router, such as 2.4GHz and 5GHz. When you face the Nexus 5 WiFi trouble, you can try to set your device to use only the 2.4GHz band by going to Setting > Wireless and Network > WiFi > Tap the Menu button again > Select Advanced/Wi-Fi Frequency Band > Tap 2.4 GHz only.
Troubleshooting 8:
Choosing the option “Avoid Poor Connections” on your LG Nexus 5 will prevent your device from connecting to a weak Wifi network that could be used. To avoid the Nexus 5 Wi-Fi connecting troubles, you can let your Nexus 5 try possible available WiFi networks by going to Settings > Wireless and Network > Wi-Fi > tap the Menu button > select Advanced Wi-Fi > Uncheck Avoid Poor Connections.
If all the above-mentioned Nexus 5 WiFi connecting solutions are not workable for your handset, you can call LG customer support to ask for help.

Read More

Master Hard reset on Motorola Q9

Reset to factory settings

To perform a master/hard reset on your Motorola Q9 you will need to:
Motorola Q9 is turned off, then hold down E and Z on the keyboard, then turn on while holding the E and Z.  And Watch it reset your phone.

Read More

Nokia 2330 Classic Auto Restart On Off Problem Solution

If you are facing Auto restart problem in Nokia 2330 Classic it can be solve with a few simple steps that are given bellow in this post.A diagram to solve Restart problem in Nokia 2330 is also given bellow.Nokia Asha 300 Mic Not Working Problem Solution Jumpers

As In above diagram you can see a red line jumper.If you have restart problem in Nokia 2330 Classic make jumper as shown in above repairing diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia Asha 311 Mic Problem Jumpers Ways Solution

if Nokia Asha 311 have mic problem our voice can not reach to destination and we can not record voice in it.mic problem can be reason of parts damages or carbon rust and water damages.so to solve this issue in Nokia Asha 311 look at diagram bellow and check all these components and parts.these parts are used in Microphone function in Nokia Asha 311.Nokia E52 Shortage No Power Problem Solution


once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia Asha 311.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

nokia 2320 Classic speaker ear piece problem solution jumper ways

Nokia 2320 Classic. We can not hear a voice call.Noise in ear peace speaker or low voice problem can be solve with this post.Read carefully all these tips and follow diagram that is given bellow to solve speaker problem solution in Nokia 2320 Classic Nokia 2330 Classic Local Test Mode Problem Solution see all cellular mobile repairing solution.
In above diagram you can see red and blue lines.These lines are tracks and paths that are used in speaker function in Nokia 2320 Classic. So check all these parts with meter and if any of them is missing apply jumper.You can apply jumper at points that are shown in diagram for repairing speaker problem solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

How To Downgrade Your HTC Hero G2 Before Rooting

Rooting HTC Hero (G2)

BEFORE YOU BEGIN:

Before trying this procedure, try the How To Root the Hero In One Click since its update. Should work for all Heros (read the before you begin on that procedure carefully). If not then come back to this procedure.

Make sure you have an SD Adapter to put your MicroSD in
so you can plug it into a computer and access it.

• Download and Install the Android SDK and USB drivers (If you already have this done, skip this section).

1. Follow our video procedure on HOW TO SETUP ADB/USB DRIVERS.

• Create a “GoldCard” from a MicroSD Card

1. Put the memory card you want to use for the GoldCard into your phone.

2. With the memory card in your phone, click on Settings, SD and Phone storage, then click Unmount SD card. Once it unmounts, click Format SD card. (Please keep in mind that some memory cards don’t work, and this will erase all data on your SD Card so back all the data up first to your computer)

3. On the Phone, goto Settings, Applications, Development and then make sure USB Debugging is checked.

4. *Make sure you have installed the SDK and Fastboot correctly from Section I!!!
Plug the phone into the computer and then open the Command Prompt (goto the start menu and type in cmd in the search box). Then type the following with hitting enter at the end of each line.

cd
cdAndroidSDK ools
adb devices

(wait for the it to show a serial number underneath, if it doesn’t then reinstall the drivers from section I). Then type:

adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid

5. A code will display, write the code down (MAKE SURE TO WRITE IT DOWN EXACTLY!)

6. Goto this site, Soaa.me - (write down, copy, paste, and then) One-click hex reverse for GoldCard creation, then put in your code you just wrote down into the text box and click submit. It will generate the code reversed and replace the first two digits with zeros automatically. Write that down and continue to step 9.

7. Now, on your computer, goto Redirection and enter your email in the appropriate field and for CID enter the reversed CID you just copied down BUT REPLACE THE FIRST 2 DIGITS WITH 2 ZEROS!

8. Click continue and then you will receive your goldcard.img via email. Once it arrives save it to your computer.

9. Now, goto http://download.cnet.com/HxD-Hex-Editor/3000-2352-10891068.html?part=dl-HxDHexEdi&subj=uo&tag=button to download the HxD Hex Editor. Save it and install it to your computer.

10. Take your SD card out of your phone and put it into the SD adapter it came with. Then put that into your computer so it shows up on your computer as Removable Disk.

11. Open the Hex Editor (Run as Administrator if one Vista or Windows 7) and click on the Extra tab, then click on Open Disk. Under Physical Disk select Removable Disk (your SD card you just put into the computer). Make sure to UNcheck “Open as ReadOnly”. Click OK.

12. Goto the Extra tab again and click Open Disk Image. Open up the goldcard.img that you saved from your email. You should now have two tabs, one is the SD card (Removable Disk) and the other is the goldcard.img
Press OK when prompted for Sector Size 512 (Hard Disks/Floppy Disks).

13. Click on the Goldcard.img tab and click on the Edit tab and click Select All. Then click on the Edit tab again and click Copy.

14. Click on the Removable Disk tab (Your SD Card) and select offset 00000000 to 00000170 then click on the Edit tab and click Paste Write.

15. Click on File then click Save.

16. Close the Hex Editor.

17. Test what we’ve done:

Take out the memory card from the computer, then put it back in.
Try to open the memory card on the computer (Removable Disk), if it lets you, you are all set. If it asks/tells you to reformat the card, then try steps 13 – 19 again. If it gives you the same error again, then try a different memory card (Erlern said it didn’t work for him until he finally went and bought a Kingston 2GB card, then it worked on that card only).

18. Put the GoldCard into your phone and reboot the phone with the GoldCard inside.

III. Downgrade the Hero using the Goldcard
1.Download and install HTC Sync
2. Plug in your phone via USB cable to your computer (make sure the GoldCard is in the phone).
3. Once HTC Sync is installed and your phone is plugged in, pull down the notification bar on the phone and select HTC Sync. Make sure it connects to HTC Sync on the computer.
4. Download the Original HTC Hero RUU
5. Double click the RUU you downloaded while the phone is plugged in with the GoldCard in it and follow the on screen procedure.


Reported Issues
Issue: I get an issue at step 5 or this procedure does not work for me.

Solution: Try to repeat the procedure with the 2.73.405.5 RUU listed on the site here:
Alternative RUU
Issue: I get Wrong Customer ID or a similar error when trying to use the RUU.
Solution: This means your Goldcard did not work and you need to try to do it again with a different SD card.

Read More

Nokia C5 00 Not Charging or Fake Charging Solution IC

Nokia C5 not charging problem, Charging Ic, Fake Charging. All these problem can be solve with a few basic steps that I am going to teach you here in this post.If you plugin charging pin into charging jack of Nokia C5-00 and it do not show any notification on Lcd and start charging also but do not full charge the battery it can be fault charging IC that is used in the mobile phone for charging.

So find them and clean these parts with electronics cleaner.So that if there is some rust or carbon that can be clean.Apply hot air to dry it and do not apply much because it can be harm for your skin.
Reslod these parts and re flow them can solve fake charging problem in Nokia C5-00. If it can not solve the issue then replace them to solve fake charging problem in the Nokia Mobile phone.

Read More

Nokia 6700c classic No Network Signal Solution

Heres the solution for a damaged Nokia 6700c with No Network Signal (coverage ) problem. This solution can be used if the problem is not caused by the device flash firmware. So ensure to restore the or update the flash firmware first before proceeding into hardware troubleshooting.

The following solution showed the Nokia 6700 classic RF circuit. You can used this as a guide  to troubleshoot no network problem on the device.

Nokia 6700c classic No Network Signal Solution

 Repair tips:
In troubleshooting network problem on Nokia 6700 classic , you must first check the RF power supply chip. Then, the RF clock (VXO) then down to the corresponding PA (power amplifier chip). There are two PAs is mounted on it, for GSM and WCDMA bandwidth. Before trying to rework or replace the chips ensure that each corresponding supply voltage were okay.

Read More

Nokia 1800 1616 LCD Display Problem Lines and components Test and Tracing spots

This repair solution show the particular components and line paths of  Nokia 1800 and Nokia 1616 Lcd display signals. This guide can be used for quick troubleshooting and repairing display problem issues on Nokia 1800 and Nokia 1616.
This repair guide shows  on where and which particular components of the LCD data signal feeds across to a particular components, including even the solder ball bumps of the infeon X-gold 110 chip through to the LCD filter coils, resistors and LCD display module.

 There are two LCD voltages that feeds to the LCD module, the 1.8 volts Dc which is in color pink line and the 2.8 volts which is in green line.  The other four which are the display data signals.
This guide is useful when the display data filter coils and resistors already been replaced but the problem still exists. You can trace all of those corresponding line paths when the time that you need to remove, rework and even trying to replace a new IC.

Read More

Nokia 1800 and Nokia 1616 Keypad and LCD Display backlight LED failure solution

This solutions shows the location of particular components or spare parts on the PCB board layout that might get damaged and cause the device for unable to light up the LCD display backlight LEDs including the keypad backlight LED.

Nokia 1800 and Nokia 1616 LCD display backlights circuit components layout

This also includes the line paths of each particular voltage and current that feeds to the backlight LEDs of the LCD display module from the inner most part of the main ic component solder ball bumps for deep troubleshooting analysis.

Repair tips: check and have a continuity test on all filter coils and each lines paths from where it is being connected according to the pictures layout.

Read More

Nokia 5630 keypad Keys and button switches failure solution keypad Ic jumper ways

Heres the solution and guide to repair Nokia 5630 Xpressmusic keypad keys malfunction. This solution completely shows the line tracks of each corresponding keypad keys for easy tracing and repair method.
On Nokia 5630 keypad circuit, there are two ESD-EMI filter chips has been used and connected to the keypad keys group of particular connections. Each  inner and outer core layer of keypad matrix is being group in one particular connection. Nokia C3 Qwerty Keypads Ways and Solution

5630 Keypad IC and Keypad connection Jumper Solution

Grouped Key line configuration and connection to the pin connector:

Keypad Outer Core layer:

Line 1 connected to pin number 10 -  Volume up, 1, 2, 3, Right soft key
Line 2 connected to pin number 8   - Volume down, 4, 5, 6, Left soft key
Line 3 connected to pin number 7   - 7, 8, 9, clear key
Line 4 connected to pin number 13 - Navigation select, *, 0, #, Application key
Line 5 connected to pin number 14 - Navigation up, Send, Camera, Navigation down
Line 6 connected to pin number 20 - Navigation right, Music key1, Music key2, Music key3, Navigation left

Keypad Inner Core layer:
Line 1 connected to pin number 15 -     Volume up, Volume down, Navigation select, Navigation up,
                                                            Navigation down
Line 2 connected to pin number 9 -       1, 4, 7, *, Send, Music key1
Line 3 connected to pin number 1 -       2, 5, 8, 0, Camera, Music key2
Line 4 connected to pin number 3 -       3, 6, 9, #, Music key3
Line 5 connected to pin number 12 -     Right soft key, Left soft key, Clear, Application, Navigation Down
Navigation Left

Read More

Nokia 2690 Earpiece Speaker No Audio Sounds Solution

Heres the solution that may possibly help fix and repair Nokia 2690 Earpiece Speaker No audio sound output problem.Nokia N78 White, Blue, Black and Blank Screen Display problem solution

2690 earpiece speaker jumper ways

You may need to ensure and check that the earpiece  speaker is working before replacing those components composed of filter coil and an ESD filter. If all of those components were all seem good the problem may lies on a broken line paths from the power and audio IC (AVILMA). So , for further troubleshooting you may need to rework the power supply chip that might possibly fix and repair Nokia 2690 Earpiece Speaker Sounds problem.

Read More

Blackberry 9800 Cellular Phone Keypad Not Working Repair Solution

Blackberry 9800 cellular phone keypad not working phone on but any key not working full hang solution blackberry keypad full hang phone any key not working 100% working solution many time phone water damage and set run but keypad not work i have tested solution without ic working keypad again see my solution

Blackberry 9700-9780 cellular phone lcd ways repair solution

see this jumper ways 100% working this jumper 

and enjoy it this solution many time tested me see and try this and dont forget visit my blog,

Read More

Blackberry 9700 Cellular Phone Keypad Repair Solution

blackberry 9700 cellular phone keypad repair solution blackberry 9700 keypad is not working problem can be due to a few basic reasons for this solution it can be due to Keypad ic.so if you do not want to change keypad ic then you can apply these jumpers as given in diagram bellow working this .
Blackberry 9630 Cellular Phone Lcd Light Repair Solution 

see and change this all parts 1 by 1 and step by step and check your blackberry 9700 keypad i think solved 100%.
in diagram above you can see different color lines so apply same jumpers to short keypad in .if you have keypad ic then in you first preority change it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about your cellular phone .

Read More

Blackberry 9700 Cellular Phone Volume Keypad Ways Repair Solution

blackberry 9700 cellular phone volume keypad ways repair solution,Volume Up Key is Not Working solution here Hot Air is required.
Soldaring iron is required.
Electronics cleaner solution here,blackberry 9700 cellular phone camera repair solution

Four leg On of Switch ( Volume Key Switch ).
old board of blackberry 9700 if a few parts are damage in this board.So that they can be replaced.
blackberry 9700 Voluem Up Down Keys Not Working Problem Solution Jumpers
Solution ,If Volume Up or Down key is not working in blackberry 9700 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Read More

Blackberry 9300 No Backlight Solution Ways Jumper solution

blackberry 9300 no back light solution ways jumper solution,blackberry 9300 no light not working solution,blackberry 9300 no light solution,blackberry 9300 light solution ,blackberry 9300 light not working solution ,blackberry 9300 set on but no light solution,blackberry 9300 no light jumper solution,blackberry 9300 light ic solution ,blackberry 9300 with out ic light working solution,blackberry 9300 back light not working solution guide here ,blackberry with out ic light working solution here , blackberry no light only jumper done solution many time phone all ok but not show set light if u have this problem phone i give solution many time tested solution here see my solution i hope solved your phone 100% working solution see blackberry Blackberry 9000 cellular mobile repairing connect charger or usb display goes Solution

and see your blackberry 9300 back light solution ways jumper solution.

see this jumper ways 100% tested solution this solution many time tested me try this i hope solved your cellular blackberry 9300 phone light solution.

Read More

Blackberry 9300 Cellular Phone Mmc Repair Solution

blackberry 9300 cellular phone mmc repair solution ,blackberry 9300 cellular phone mmc not working solution ,blackberry 9300 cellular phone mmc jumper  repair solution ,blackberry 9300 cellular phone mmc line ways guid  repair solution,blackberry 9300 cellular phone mmc jumper  repair solution here if u need blackberry many phone 100% tested solution i have all solution see blackberry 9000 Cellular phone sim ways repair solution ,blackberry 9300 cellular phone mmc jumper  repair solution guide ,blackberry 9300 cellular phone mmc jumper  tips and tricks here if u have this phone mmc problem many time water damage phone have this problem set on but memory not working i have this 100% tested solution 1st time try servicing fuul board 2nd time try my solution i hope solved your problem.

blackberry 9300 memory ic solution,blackberry memory ic not working solution,blackberry 9300 memory not working solution ,blackberry memory baaies problem solution ,blackberry 9300 memory card not accept solution 100% tested solution here see and enjoy it.

Read More

Nokia C5 hardware solution No Earpiece Speaker Audio Sound solution

Heres a solution that may help fix and repair hardware related damaged on Nokia C5 No Earpiece Speaker Audio Sound  output. If the earpiece speaker already been check and seems to be working fine but still no audio sounds can be heard. you may need to check those certain components indicated on the solution.

Repair hints:
1. Check/replace the ear speaker
2. Clean the speaker terminal pads
3. Check/replace the filter coil
4. Check/ replace the ESD filter or remove it,

Read More

Blackberry 9700 cellular phone white display Display ways solution

blackberry 9700 cellular phone white display & Display ways solution if u have blackberry 9700 display problem this phone and u need this solution of display jumper solution i have working solution for jumper blackberry 9700 see this repair solution and working step by step i hope solved your phone display ways 

blackberry 9700 cellular phone headphone repair solution 

this solution working for blackberry white display not show any picture blackberry all display ways here this jumper ways see this line and and try step by step ways i think solved your phone dispaly not working for blackberry white display solution.

Read More

Nokia 2330 Classic Insert sim problem solution ways jumper

Insert sim problem in Nokia 2330 Classic, Sim not valid problem in Nokia 2330 Classic can be cause of water damages or broken parts in the mobile phone.To solve these problems keep reading this post and look at diagram.Nokia Asha 300 Ringer Problem Solution jumpers

In above diagram you can see Sim Ic that is used in Insert sim problem solution. So remove this Ic and apply jumpers as shown in above diagram.
A zoom image is given with it and blue color lines show jumper ways.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone

Read More

How to Backup and Factory Reset LG G Flex

Resetting your LG G Flex will restore the default settings of your device. It will also delete all your files on your phone, so it is recommended to backup all your important files on your computer.

Luckily in LG G Flex, you can backup your data through your phone on privacy settings before wiping all the data on your phone. But if you want to erase all the content on your phone, then there’s no need for you to backup your data.


To backup your data:

You can only backup app data, Wi-Fi passwords, and other settings to Google servers.

Step 1. Tap on the Home Icon > Three Horizontal Lines or Settings.

Step 2. Select System settings > Backup & reset.

Step 3. Double check if the Backup account is correct.

Step 4. Then tap Back up my data. (A blue checkmark will appear.)

Step 5. If you want to set to the automatic restore backups, tap Automatic restore. (A blue checkmark will appear.)


To Factory Reset Your LG G Flex:

Step 1. Tap on the Home Icon > Three Horizontal Lines or Settings.

Step 2. Select System settings > Backup & reset.

Step 3. If you want to proceed in restoring the factory settings, tap Factory data reset.

Step 4. Then tap Reset phone.

Step 5. Enter the unlock sequence if you have, then tap Erase everything to confirm.

Read More

Nokia C5 03 USB not charging Not detect problem solution jumpers

If Nokia C5-03 is not charging with usb or USB data cable can not detect. This problem can be cause of water damages carbon or burn. And may be due to usb jack damages.Nokia C5-03 MMC Memory Card Not working problem solution

After dis assemble of Nokia C5-03 look at mother board and If you found some rust carbon or water damages then it can also be cause of Nokia C5-03 USB problem to solve and fix USB problem in Nokia C5-03 clean all the rust and carbon with electronics cleaner and apply hot air to make it dry.
In above diagram some different color lines are given to identify paths and tracks that are used for usb charging and usb data transfer in Nokia C5-03.Check all these paths tracks and parts components with meter. If any of them is missing apply jumpers as given in diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

Nokia 3110c Power Swich Not Work

Nokia 3110c Power Swich Not Work
Nokia 3110c Power Swich Problem
Nokia 3110c Power Swich  

Read More

Nokia 6101 Light Ways

Nokia 6101 Light Ways,
Nokia 6101 Light Problem,
Nokia 6101 Light not working,
Nokia 6101 No Light,
Nokia 6101 Light IC Jumper,
Nokia 6101 LCD LED Ways,
Nokia 6101 Keypad light Problem,
Nokia 6101

Read More

Nokia 100 insert sim solution jumper

As most of mobile phones have six point of sim card. In all sim cards sim jack use five prints that are used in sim function. As in given bellow diagram you can see different color lines.Nokia 1616 Light Problem Solution with Jumpers

These lines are identifying sim point of nokia 100.
Check all these points and track with meter and if any of these prints are missing apply jumpers to solve nokia 100 insert sim solution. Once you have check and apply these sim point jumpers insert sim problem of nokia 100 will be solve easily.

Read More

nokia x2 00 handsfree solution

nokia x2-00 handsfree solution
x2-00 hf ways
how to open nokia c2-00
how to open the board of nokia x2-00 images
nokia 100 hand free jaik jumper
how to open all parts of nokia X2-00
x2-00 hand free paroblam jamfar
Nokia x2handfree solu
nokia x200 hand free not working
Nokia X2-00 Image problems
nokia x2 handfree jaik paroblam

We’re collections Nokia X2-00 hardware solution this solution was created by Mahbub alfa.
Nokia X2 handsfree problem,
Nokia X2 headphone solutiion,
Nokia X2 headphone not detract problem,

Read More

How to easy and fast to put and sync movies or music on Droid X Android Phone

How to easy and fast to put and sync movies or music on Droid X Android Phone

How to easy and fast to put and sync movies or music on Droid X Android Phone

More and more people would like to use Android phone. Motorola Droid X is one of the most popular one. With Droid X 4.3 inch, 854*480 resolution Lcd and HD camcorder, your hand becomes a theater. To watch movies and videos anywhere anytime with good quality is possible.

First, let’s view Motorola Droid X supported file formats.
It supports HD 720p quality (1280*720p resolution) up to 24 frames per second and up to 30 fps playback and the Droid X playback formats include AAC, MP3, H.264, H.263, MPEG-4, WAV, eAAC+, WMV v10, MIDI, AAC+.

As you see, not all videos/movies can be played on the Droid X, like TiVo, WMV, WMV HD, MKV, TS,M2TS, AVI, DivX, and more. In order to play these unsupported movie/music formats on Droid X, a powerful Driod X Video Converter is needed that helps you convert movies or music for Droid X at up to 5x faster speed without video/audio sync problems.

But which video format is the best for Motorola Droid X? Video H.264 (*.mp4) at 1500 bitrate 23.97 frame rate with 854*480 is recommended here. The guide on how to convert video to Droid X will be of great help for you.

Step 1: Mount Motorola Droid X to your computer via USB. (Please ensure the memory card is inserted.)

Step 2: Take the Droid X and go to Notifications (there are two ways you can realize it: Touch the nitification bar at the top of the Droid X’s Lcd and drag it down, or press Menu droid x menu key - > Notifications). Then touch USB connection.

Next, touch USB Mass Storage and press OK. The computer will read the handset as an external drive.

Once your SD card is mounted on your computer, you can easily open the memory card in My Computer.

Step 3: Create a file named Movie or Music in the root folder on the Droid X. (It is optional to help you select the file you want to play on the Droid X easily.)

Step 4: Transfer or copy the converted movies or music from your PC to the Droid X.

Step 5: Unmount SD card. Once the movies and music are transferred to your Droid X, you can eject the drive.

That’s all! Now, you can play movies and music on Motorola Droid X using the Gallery app. Hope you will have a perfect movie and music experience! 

Read More

nokia 110 insert sim solution

Nokia 110 have two sim jacks and if you have problem of nokia 110 insert sim 1 or insert sim 2. You can find out the solution in bellow diagram. It may can be cause of water damages or burning parts.
nokia c5 only vibrate no power on

In above diagram you can find some different color lines. All these lines are given to show tracks and paths to make jumpers if any of them is missing.You can check these tracks with meter and if any of them is missing apply jumpers as shown in above insert sim repairing diagram.

Read More

1110 light easy solution here

1110 light easy solution here

Read More

Nokia 111 Network Problem Solution Jumper Ways

if you have network low signals problem in Nokia 111 you can fix this problem with a few steps as given in diagram bellow.Nokia 111 network problem can be cause of missing components or water damages.In this problem would no be able to make Voice calls or it may drop call during calls automatically.

in above diagram there are two different color lines that shows full track of components and parts which are used in network signal function.Check all these track and parts to solve Signal problem in Nokia 111 and if some path missing apply jumpers as given in above diagram.
You can resold PA also to fix network problem in Nokia 111.we will soon update this post with P.A jumpers.so that you can solve network problem without power amplifier.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Read More

How to Hard Reset Nokia Lumia 525

There are two ways on how to reset your Nokia Lumia 525, it can be through the hard reset or soft reset. When you say hard reset it involves on the hardware part, so you need to remove the battery of you Nokia Lumia and reinsert it. Then turn on your device normally. This should refresh the content of your device but will not remove any data.

Software reset will return your device to its default settings. Like a brand new phone, no information or data saved on your device. This procedure will erase all your data save on your phone.

If your Nokia Lumia is frozen, it is recommended to perform the Hard Reset.

You can soft reset your Nokia Lumia in two ways. By accessing it through settings or doing the hard key combination.

Resetting through the settings:

Go to Settings > About > reset your phone.


Hard Key Combination:

Use this option if your device is locked and you dont know the code.

Note: Make sure that your Nokia Lumia is turned off.

Step 1. Press and hold the power key until it vibrates then release.

Step 2. Press and hold the down key volume. If the exclamation mark will be shown on the Lcd, you can now release the button.

Step 3. You need to input these key combination:

Volume Up > Volume Down > Power > Volume Down.

Read More

latest Jellybean ROM for your Galaxy S3

Latest Android 4.1 JellyBean ROM for your Galaxy S3

You might be wondering where this is headed..Jellybean has not been released for Galaxy S3 yet. You are right my friend, but there have been numerous leaks of the 4.1 ROM and the latest one is Buttery Smooth and Stable. All the features are fully functional.

So if you want to take a dive..read along:

Latest 4.1 firmware is GT-I9300XXDLI5 for BTU (United Kingdom) region. But dont worry it works flawlessly in all the regions.

To try these leaks you will have to choose either of the two below mentioned methods:

Using Odin:

Odin is the all purpose tool for Samsung devices which has completely replaced Kies on many PCs. It is light, fast, fluid and reliable.

You will need to first set up Odin in your PC (Hemidall in case of Mac users, dont ask me how to do it as I dont have a mac). Get Odin from here.
Once you have downloaded the zip file. Extract it somewhere you will remember.
Open the extracted folder and then open Odin3_v3.04.exe. It will ask you for administrator privileges, grant it.

Now download the latest ROM from here. Extract the tar from this zip to your PC.

Boot your phone into download mode, you can do this by pressing and holding Volume Down+Power+Home buttons together. Release the buttons when you see a robot with yellow triangle. Now press volume up button to enter into download mode.
Connect your phone to your PC. You will see Odin will recognize your phone and will show a message "Connected". The first box in the third row from the top will turn blue and say ID:COM7.

Now, the fun starts, click on PDA button and choose the tar file you had just extracted. Only Auto Reboot and F.Reset.Time options should be checked in the boxes above. If the Re-Partition box is checked Un-check it.
Click on Start, Odin will start installing your ROM. It will take some time so be patient. Once the installation is complete, your phone will reboot and you will have Jelly Bean on your phone.

Using ClockworkMod Recovery:

To get CWM recovery on your phone check my earlier blogs.

Download the ROM from here.
Put the zip file on your SDcard. Reboot into CWM recovery by pressing and holding Volume Up+Power+Home buttons together. Choose "Install from SDcard", Navigate to the zip file and choose "Yes" when asked for confirmation.

Once installed reboot your phone and enjoy the Jellybean goodness.

Both the Firmwares can be used by any International Galaxy S3 phones. You dont have to worry about which firmware you are currently at.

Enjoy the Android Goodness !!

Read More

Samsung Rex 60 C3312R Hard Reset Instructions

Samsung Rex 60 C3312R Hard Reset Instructions - The Samsung Rex 60 C3312R is dual sim phone for indian market. The phone was relesed on 2013, March (last month). Its work on GSM network with frequency of 850 / 900 / 1800 / 1900.  If you owner of this phone, do you know how to hard reset for Samsung Rex 60 C3312R? Ok, we have tutorial / guide or instructions for it. How step by step? Please read below:

Step by step to hard reset for Samsung Rex 60 C3312R:
First, Enter *2767*3855# . Don,t forget, always backup you important data like messages, contacts and other because its will be lost.

Read More

Nokia Display IC Jumper Solution

Nokia Display IC Jumper Solution pack Download,

if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.

Read More

Samsung i9003 All Keypad Not Working fix problem

Samsung i9003 All Keypad Not Working How to Fix problem,Samsung i9003 All Keypad Hang Not Working How to Fix problem,Samsung i9003 All Keypad Not Working Ways How to Fix problem,Samsung i9003 All Keypad Not Working How to Fix problem,Samsung i9003 All Keypad Not Working Keypad Ways Jumper How to Fix problem,Samsung i9003 All Keypad Not Working Which Parts To Remove This Again Working handset How to Fix problem,Samsung i9003 All Keypad Not Working Repair How to Fix problem,Samsung i9003 All Keypad Not Working Step By Step Procedure Here How to Fix problem.Tnxx To Visit My Blog Its You Tested Plz Share This Post .

Read More

How To Windows Automatic Shutdown Windows Vista 7 and Windows 8

Windows Automatic Shutdown

This guide is for all Windows users who want to configure their Computer, Laptop or PC to automatically shut down at specific time. The tutorial is working fine for all versions of Windows such as Windows Vista, Windows 7 and latest Windows 8. The feature of automatic shut down comes to use when you want your computer to automatically shut down at some specific time of the day. You can choose various options according to your needs such as how many times you want your computer to auto shutdown, once a week, at some specific day etc.
Also Read: How to Recover Files in Windows
Following is the simple and easy to follow tutorial given for Windows users to automatically shut down their Personal Computer or Laptop. The basic steps for each Windows (Vista, Windows 7 and Windows 8) are same, though there may be some small variations at some steps according to your Windows version. In this tutorial, we are going to use an official tool provided by Microsoft in all Windows. This is known as Task Scheduler. It is very simple to use and also very useful. So, you dont have to download any third party software or programs to automatically shut down your computer. Following are the simple and easy to follow tutorial.
Recommended Read: How to Make Your Computer Respond to Your Voice Commands

How to Schedule Auto Shutdown in Windows Vista, Windows 7 and Windows 8

• In Windows Vista and 7, click on start button, type Task Scheduler and hit enter. Or you can run Task Scheduler from the control panel. In Windows 8, open control panel, Click on System and Security and then Administrative tools.
• Now find and Run the program in the list - Task Scheduler.
• A new Window will open. Click on create a basic task.
• Complete the first step by entering any desired name and description for the task. Here we are going to use Auto Shutdown as name and Shut Down My PC at 12:00 AM as description.
• Now click on next and you will be asked for When do you want to start the task? This is trigger section. Select your appropriate option and click next. For example, we have selected Weekly option from the list.
• Now configure your selected option. In our example, we have chosen the shut down time (12:00 AM) and the days at which computer will automatically shut down.
• Now you will be at Action window. Choose Start a Program from the list and click on next.
• In the text field of Program/Script, type the following: C:WindowsSystem32Shutdown.exe and click on next.
• Now check your task details and click on Finish.
• From now, your computer will shut Automatically according to your selected options

Read More

Gfive w5 mic solution

This is main line of gfive w5 mic ways.If you change a new mic but problem still then replace a good microphone.

Read More