 |
| Nokia 6085 Pinout solution |
Thursday, December 18, 2014
Nokia C2 06 Blank Lcd Display Nokia C2 06 White Lcd Display Nokia C2 06 Lcd Jack Damage Prints Missing
Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, December 11, 2014
Samsung S3310 No Ringer And Spreaker Repair Solution
Samsung S3310 No Ringer And Spreaker Repair Solution
Sunday, December 7, 2014
Repair BlackBerry 8520 Not Charging Problem Jumper Solution
Repair BlackBerry 8520 Not Charging Problem Jumper Solution
Saturday, December 6, 2014
Nokia Lumia 610 Mic Point Jumpers
Solution: First try to change mic with new one.if problem not solved then try to trace missing mic points with multi meter.The diagram below is solution for nokia lumia 610 mic problem.Check all points as shown in diagram below and make jumpers like diagram.
Friday, December 5, 2014
Nokia Lumia 520 Ear Speaker Jumer Ways Solution
This post contains The hardware diagram solution for Nokia Lumia 520 Ear Speaker ( Ringer ). The first solution is that you should simply replace the speaker. and if the problem is in the board then try the following diagram solution.
29 LG GW300 Software Upgrade Flashing Tutorial
If you are LG GW300 users and have a problem with it ( software problem ) like Auto Shutdown AKA Restarting, Hanging or stuck, now you can repair it for free.
Ok, let startded..,
Tools & Materials
Ok, let startded..,
Tools & Materials
- Original Usb data cable, compatible with Nokia CA-101 Usb data cable
- Software updater / flasher ( GSMMULTI V3.0 ). click here to downlod
- LG GW300 Firmware click here to download
Step by Step- Download & Extract LG GW300 Flasher
- Execute / Install SETUP_GSMULTI_V30, and then C:GSMULTI folder will be created
- Find MultiGSM_V30.exe on C:GSMULTI folder, then right click, send to desktop
- Execute / Install Setup_USB_PortMapping_04.exe, and the result will be stored in C:GSMULTIUsbDriversMTK
- Connect phone ( in power off condition ) to PC via Usb data cable, wait until detected by PC
- When PC asking for driver, go to C:GSMULTIUsbDriversMTK, wait until driver installed
- Open MultiGSM_V30.exe ( at desktop ), go to Tab Setting ==> Configuration. For DLL, choose GW300_090625.dll at LG GW300 Flasher folder, for S/W file choose LG GW300 Firmware. For other setting dont changed
- Final step.., just click on START button and wait untill all process done / pass.
